User Manual

Messages and Signals
168
Display messages (cordless handset)
BUSY When you attempt to make a phone call or page
another device (machine or cordless phone), the
system or other device is busy and cannot respond.
Wait until the system or device is no longer busy. This
message may also appear if you are slightly out of the
communication range and you attempt to make a
phone call (try moving closer to the machine; note
that the display may still indicate that you are in
range).
C (blinking)
has been pressed to place a call on hold. To
resume the call, press again.
CALLS This appears when you access the Caller ID list in the
machine by holding down (only if you have
Caller ID).
EMPTY This appears if you access the machine’s phone book
or Caller ID list and there are no numbers.
0 - 6
(a number from 0 to 6
appears)
Your cordless handset is being paged (press to
answer), or your cordless handset is paging the fax
machine or another cordless handset.
(blinking)
The cordless handset batteries are low and need
recharging. Place the cordless handset in the cradle
(or in the charger if applicable). If this appears soon
after the batteries have been charged, the batteries
may need replacement (see page 156). If this
appears during a phone call (you will also hear
beeps) and you need to continue the call, transfer the
call to the machine.