User Manual

Messages and Signals
165
11. Trouble-
shooting
Messages and Signals
Display messages
Note: If you have turned on the Caller ID function, see page 137 for display
messages related to Caller ID.
ADD PAPER & /
PRESS START KEY
(alternating messages)
Check the printing paper. If the tray is empty, add
paper and then press . If there is paper in the
tray, make sure it is inserted correctly (take out the
stack, align the edges evenly, and then reinsert it in
the tray) and then press .
AM MEMORY FULL The answering machine’s message memory is full.
Erase recorded messages as explained on page 90.
A.M. TRANSFER The answering machine's transfer function has been
turned on (see page 93).
CALL TRANSFER A call is being transferred. (On occasion, this may
also appear while paging the cordless handset for an
intercom call.)
CHANGE CARTRIDGE This message appears after you install or replace the
print cartridge (see page 25).
CHECK CARTRIDGE The print cartridge is missing and must be installed,
or is not installed correctly.
DECT HS IN USE The cordless handset is in use. Wait until this
message no longer appears to send a fax or make a
phone call from the fax machine.
DOCUMENT JAMMED The original document is jammed. See the following
section,
Clearing Paper Jams . Document jams will
occur if you load more than 10 pages at once or load
documents that are too thick (see page 104). The
document may also jam if the receiving machine
doesn’t respond properly when you attempt to send a
fax.
START/
MEMORY
START/
MEMORY