User Manual

Operating the Answering Machine
87
4. Answering
Machine
To listen to the outgoing message
To listen to the outgoing message, follow Steps 1 and 2 of the above
procedure and then press . Note that the general outgoing message
cannot be erased. If you need to change it, simply repeat the recording
procedure.
Operating the Answering Machine
Activating the answering machine
To turn on the answering machine so that callers can leave messages, press
until appears in the display.
PLAY/HOLD
RESOLUTION/
RECEPTION
RESOLUTION/
RECEPTION
♦ It will not be possible to set the reception mode to A.M. if an outgoing
message has not been recorded.
Note: In A.M. mode, the machine will automatically switch to fax reception if it
detects six seconds of silence after answering a call. For this reason, if a
caller pauses for this length of time while leaving a message, they will be cut
off.
01-JAN 12:00
all.book Page 87 Wednesday, October 6, 2004 3:44 PM