User Manual

Storing and Using Auto-Dial Numbers

Dialling an auto-dial number

Note: If you are on a Flash-type PBX and are dialing out, press before

performing the procedure below.

Press once.

Press or until the auto-dial number that you wish to dial

appears in the display.

• To go directly to names that begin with a certain letter, hold down the

number key with that letter until the letter appears in the display, and then

press until the desired name appears.

• To check the number of a name in the display, press .

• If you wish to dial an auto-dial number that is stored in the machine, press

until BASE appears in the display, press , and then press or

until the desired number appears. Note that auto dial numbers in the

machine that begin with an “R” (to dial out from a flash-type PBX) will not

appear.

Press .

• The number is automatically dialed.

Return to Step 2 to store another number, or press repeatedly to

exit.

all.book Page 50 Wednesday, October 6, 2004 3:44 PM