Specifications

Sending a Fax by Automatic Dialling
64
Using an auto-dial number
Once you have stored a fax or phone number, you can use it to send a fax or
make a phone call.
1 If you are sending a fax, load the
document(s).
• If desired, press to set the
resolution and/or contrast.
2 Press (or ) until the name of the other party appears in the
display (if no name was stored, the number will appear).
3 If you are sending a fax, press . Dialling and transmission begins.
• Important: Remove the document as soon as it exits the machine.
Otherwise, ink from received faxes and copies may soil the document.
• If the transmission is completed successfully, the machine will beep once.
• If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 95).
If you are making a phone call, lift the handset. Dialling begins. (If you
lifted the handset before searching for the number, press to
begin dialling.)
RESO.
START/
MEMORY
START/
MEMORY
READY TO SEND
all.book Page 64 Tuesday, August 3, 2004 11:08 AM