Service manual

UX-B20U/UX-B20C/B25C
2 – 5
6.6. IJP list mode
Maintenance data of the printer is output.
[Details of maintenance data]
6.7. Printer error check mode
The cause of “PRINTER ERROR” message is displayed.
[Details of Display]
Item Clear timing Update timing
Dot counter At the replacement cartridge After printing
Page counter At the replacement cartridge After printing
Number of head cleaning (Wiping of cartridge) At the initial cartridge setting At the maintenance
Replacement counter of the cartridge At the initial cartridge setting At the replacement of cartridge
Jam counter At the initial cartridge setting At every paper jam
Display Cause of “PRINTER ERROR” message
PRINTER ERR 01 Power on reset response was not received from printer.
PRINTER ERR 02 Print data transfer from Printer interface ASIC to printer was not completed for 180 sec.
PRINTER ERR 03 Cap position check of the carrier is failed.
PRINTER ERR 04 Printing 1 page is not finished during 5 min.
PRINTER ERR 05 Carrier moving from cartridge change position to cap position is failed.
PRINTER ERR 06 Carrier moving to cartridge change position is failed.
PRINTER ERR 07 Cartridge replacement is failed.
PRINTER ERR 08 Cartridge ID check is failed.
PRINTER ERR 09 Carrier was not reached to cap position for 60 sec after last printed page was exited.
PRINTER ERR 10 Paper pick up is failed.
PRINTER ERR 20 Carrier stall error.
PRINTER ERR 21 Carrier stall error.
PRINTER ERR 22 Carrier stall error.
PRINTER ERR 23 Carrier stall error.
PRINTER ERR 24 Printer head short error.
PRINTER ERR 25 Printer head heater control is failed.
PRINTER ERR 26 Print start position setting is abnormal.