Operation Manual

Sending a Fax by Automatic Dialling

3 Enter the fax or phone number by pressing the number keys. Up to 32

digits can be entered. (Note: A space cannot be entered.)

• To clear a mistake, press .

• If a pause is required between any of the digits to access a special service

or an outside line, press . The pause appears as a hyphen. Several

pauses can be entered in a row.

• If you are on a Flash-type PBX and are storing a number for an outside line,

press , press to insert a pause, and then enter the fax or voice

number. (When you dial the auto-dial number, you will automatically dial out

without the need to press the key.)

• If you are on a PBX that requires dialing a number to dial out and are

storing a number for an outside line, enter the number, press to insert

a pause, and then enter the number of the receiving machine. (When you

dial the auto-dial number, you will automatically dial out without the need to

dial the number for an outside line.)

4 Press .

all.book Page 46 Tuesday, March 29, 2005 10:17 AM