Service manual

UX-A1000U
2 – 102 – 10
1 DTMF signal transmission level (High) Binary input 0
2 No. = 16 8 4 2 1 0
3 1 2 3 4 5 (n x 0.5dBm) 1
4 EX 0 0 1 0 1 0
5 eg. Signal transmission level is set to –2.5dBm. 1
6 Reserved 0
7 Reserved 0
8 Reserved 0
Reading slice (Binary) Factory Light Dark Darker in
setting dark
1 No. 1 0 1 0 1 0
2 No. 2 0 0 1 1 0
Reading slice (Half tone) Factory Light Dark Darker in
setting dark
3 No. 3 0 1 0 1 0
4 No. 4 0 0 1 1 0
5 Line density selection Fine Standard 0 OPTION
6 Reserved 0
7 MTF correction in half tone mode No Yes 0
8 Reserved 0
1 Number of rings for auto receive Binary input 0 OPTION
2 No. = 8 4 2 1 1
3 1 2 3 4 0
4 EX 0 1 0 0 0
eg. Number of rings for auto receive is set to 4 times.
5 Automatic switching manual to auto receive Reception after 5 rings No reception 0
mode
6 Reserved 0
Cl detect frequency As PTT 11.5Hz 13.0Hz 20.0Hz
7 No.7 0 0 1 1 0
8 No.8 0 1 0 1 0
Distinctive ringing setting
STANDARD PATTERN1 PATTERN2 PATTERN3 PATTERN4 PATTERN5
OPTION
(PATTERN 4 and 5 are for CANADA only)
OFF
1 No. 1 0 0 00111 0
2 No. 2 0 0 11001 0
3 No. 3 0 1 01010 0
4 Reserved 0
5 Caller ID function Yes No 0 OPTION
6 Caller ID detect during CI off All times Only first 0
7 Reserved 0
8 Reserved 0
1 Cl off detection timer (0-1550ms setting by Binary input 0
2 50ms step) No. = 16 8 4 2 1 1
3 1 2 3 4 5 (nX50ms) 1
4 EX 0 1 1 1 0 1
5 eg. CI signal OFF detect time is set to 700ms. 0
6 Reserved 0
7 Reserved 0
8 Reserved 0
SW
NO.
DATA
NO.
ITEM
Switch setting and function
1
0
Remarks
Initial
setting
SW
l
B6
SW
l
C1
SW
l
D2
SW
l
D1
SW
l
D3