User Manual

Option Settings
91
8. Option
Setting
Setting 6: REMOTE RECEPTION SELECT
If you don't intend to use the above TEL/FAX REMOTE NUMBER, you can turn
detection of the number off. This will ensure that the fax never mistakenly attempts
to begin reception if it detects a signal similar to the TEL/FAX REMOTE NUMBER
while you are talking on an extension phone. Press 1 to turn detection on, or 2 to
turn detection off.
♦Initial setting: 1
TRANSACTION LIST
or
1 2
YES NO
STOP
REMOTE RECEPTION
until display
shows:
Press
4
FUNCTION
Setting 7: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number from 1
to 5 as follows:
♦Initial setting: 3
1 (ALWAYS PRINT): A report will be printed after each transmission,
reception, or error.
2 (ERR/TIMER/MEM): A report will be printed after an error, timer
operation, or memory operation.
3 (SEND ONLY): A report will be printed only after a transmission.
4 (NEVER PRINT): A report will never be printed.
5 (ERROR ONLY): A report will be printed only after an error occurs.
TRANSACTION LIST
until display
shows:
Press
4
FUNCTION
PSEUDO RING DUR.
Enter a number
from 1 to 5
STOP