User Manual

Optional Answering Machine Settings
32
1 Press these keys:
ON A.M. FAILURE
2 Press 1 to turn automatic fax
reception on, or 2 to turn it off.
1 2
or
3 Press the STOP key.
STOP
FUNCTION
0
Press 3
times
Calling Party Control
detection
When a caller hangs up, your local
telephone exchange will issue a
signal called a Calling Party Control
(CPC) signal via the telephone line.
Your UX-485 has been set to detect
this signal, and this allows it to
immediately stop recording when a
caller hangs up, thereby saving
memory space and freeing you from
having to listen to long periods of
inter-message silence when you play
back your messages.
However, if you are a subscriber to
such telephone services as Call
Waiting or Call Forwarding, signals
used by these services may be
mistaken for a CPC signal, causing
the machine to hang up during a call.
In this case, follow the steps below to
turn off CPC detection.
Note: CPC may not operate from
some types of telephone exchanges.
For this reason, periods of silence
and/or telephone exchange end of
call signals may be recorded even if
CPC detection is turned on.
1 Press these keys:
CPC DETECTION
FUNCTION
0
Press 2
times