User Manual

Loading the Imaging Film
15
1. Installation
11 Rotate the large gear toward you
until the film is taut.
12 Gently close the print compartment
cover (press down on both sides to
make sure it clicks into place), and
then close the operation panel.
9 Cut the band that holds the two
spools together. Unroll the film
slightly and insert the small gears
into their holders.
10 Turn the cartridge over, grasp the
handle, and insert the cartridge into
the print compartment.
8 Insert the large gear into the large
holder on the imaging film cartridge
(make sure it clicks into place), and
then insert the small gear on the
other end of the spool into its
holder.
Click!