Service manual
1 – 2
UX-465L/C
UX-485LU
[2] Operation panel
1. SPEED DIAL key (UX-465L)
Press this key to dial a fax or voice number using an
abbreviated 2-digit Speed Dial number.
1. SPEED DIAL key (UX-465C/485LU)
Press this key to dial a 2-digit Speed Dial number.
2. REDIAL key
Press this key to automatically redial the last number dialed.
3. REPEAT key
Press this key to repeat playback of a message.
4. Display
This displays messages and prompts during operation and
programming.
5. PLAY/SKIP key
Press this key to play recorded message. During playback,
press it to skip forward to the next message.
6. RECEPTION MODE key
Press this key to select the reception mode. An arrow in the
display will point to the currently selected reception mode.
7. RESOLUTION key (UX-465L)
Press this key to adjust the resolution for faxing or copying.
7. RESOLUTION key (UX-465C/485LU)
Press this key to adjust the resolution and contrast before
sending or copying a document.
8. VOLUME keys (UX-465L)
Press these keys to adjust the volume of the speaker when
the SPEAKER key has been pressed, the volume of the
handset when the handset is lifted, or the volume of the ringer
at all other times.
8. VOLUME keys (UX-465C)
Press these keys to adjust the volume of the handset when
the handset is lifted, the volume of the speaker when the
SPEAKER key has been pressed, or the volume of the
ringer at all other times.
8. VOLUME keys (UX-485LU)
Press these keys to adjust the volume of the speaker when
the SPEAKER key has been pressed, or the volume of the
ringer at all other times.
9. FUNCTION key
Press this key to select various special functions.
10. Panel release
Grasp this finger hold and pull toward you to open the operation panel.
11. Number keys (UX-465L)
Use these keys to dial numbers, and enter numbers and letters when
storing auto-dial numbers.
11. Number keys (UX-465C/485LU)
Use these keys to dial numbers, and enter numbers and letters during
number/name storing procedures.
12. HOLD/SEARCH key (UX-465L)
When dialing, press this key to search for an auto-dial fax number.
During a phone conversation, press this key to put the other party
on hold.
12. HOLD/SEARCH key (UX-465C/485LU)
Press this key to search for an automatic dialing number, or, during a
phone conversation, press this key to put the other party on hold.
13. SPEAKER key
Press this key to listen the line and fax tones through the speaker
when faxing a document.
Note: This is not a speakerphone. You must pick up the handset
to talk with the other party.
14. REC/MEMO key
Press this key to record a phone conversation or a message.
15. Rapid Dial keys
Press one of these keys to dial a fax or voice number automatically.
(Note that you must attach the Rapid Key labels.)
16. Open LCR key (UX-465L ONLY)
Press this key to register for Open LCR service and receive carrier
rate data to your fax.
17. DELETE key
Press this key to erase recorded messages.
18. STOP key
Press this key to cancel operations before they are completed.
19. START/MEMORY key (UX-465L)
Press this key to begin transmission when using Speed Dialing,
Direct Keypad Dialing, or Normal Dialing.
19. START/MEMORY key (UX-465C/485LU)
Press this key to send or receive a document, or to scan a document
into memory before sending it.
20. COPY/HELP key
When a document is in the feeder, press this key to make a copy of a
document. At any other time, press this key to print out the Help List,
a quick reference guide to the opeation of your fax machine.
131211 14 15 16
81 4 5 62 3
17
7
FACE DOWN
(MAX 10 SHEETS)
JKL
SPEED
DIAL
REDIAL
SPEAKER
HOLD/
SEARCH
REPEAT REC/MEMO PLAY/SKIP
DELETE
STOP
COPY/HELP
START/MEMORY
VOLUME
DOWN UP
RECEPTION
MODE
RESOLUTION
FUNCTION
TEL FAX
TAD
ABC
2
1
DEF
3
WXYZ
9
GHI
4
5
MNO
6
PQRS
7
TUV
8
0
OpenLCR04/POLL030201
OpenLCR
910
18 19 20
Illustration: UX-465L