User manual

PaperCut - Sharp OSA Manual 2014-12-24

2.5.5 Sharp Miscellaneous Settings

1. If the administrator password has not been changed from the default of

‘admin’ it is recommended to change it to prevent unauthorized modification

of settings. It can be changed via ‘Security Settings -> Password Change ->

Administrator Password’. Choose a secure password and take note of it.

2. For devices with an external keyboard, please set the “Keyboard priority” to

“Soft keyboard” (under System Settings > Operation Settings). Switch the

device off and on again after changing this setting.

2.5.6 Confirm Installation

1. Log back in to the PaperCut administration interface and navigate to the

Devices tab. After the copier has rebooted a new device will appear in the

table with name selected in step #8. The device will have inherited the cost

settings from the “[Template Printer]”.

2. Confirm that the MFD’s LCD now displays the PaperCut login screen.

NOTE: If you are using the PaperCut embedded application for Sharp OSA

versions earlier than 3, displays will look differently. Refer to appendix 0.