User manual

PaperCut - Sharp OSA Manual 2014-12-24

MX-410x, MX-M450N, MX-M450U, MX-M453, MX-M464, MX-500x, MX-M503, MX-

51xxN Series, MX-M550N, MX-M550U, MX-M564, MX-M564N, MX-M620N, MX-

M620U, MX-M623, MX-M700N, MX-M700U, MX-M753, MX-M753N, MX-M850, MX-

M950, MX-M1100, MX-1800N, MX-2300N, MX-2614, MX-2700N, MX-3500N, MX-

3501N, MX-4100N, MX-4101N, MX-4500N, MX-4501N, MX-5001N, MX-5500N, MX-

6200N, MX-6201N, MX-7000N, MX-7001N

Other Areas

MX-M264, MX-M314, MX-M350N, MX-M350U, MX-M354N, MX-M450N, MX-M450U,

MX-M464, MX-M550N, MX-M550U, MX-M564N, MX-M620N, MX-M620U, MX-M623,

MX-M700N, MX-M700U, MX-M753N, MX-M850, MX-M950, MX-M1100, MX-1800N,

MX-2300N, MX-2614, MX-2700N, MX-3114N, MX-3500N, MX-3501N, MX-4500N,

MX-4501N, MX-5500N, MX-6200N, MX-6201N, MX-7000N, MX-7001N

Configuring PaperCut to use Sharp OSA 3 provides a better graphical user interface,

a simplified workflow and more intuitive card reader usage.

PaperCut makes all attempts to keep the product compatibility information in this

manual current. However, we make no warranties, express or implied, with respect to

manufacturer’s products or the interoperation with the listed PaperCut product(s). We

offer 40 day trial versions of PaperCut software to assist you with compatibility testing

with your network setup.

2.5 Setup Procedure

The setup procedure requires the user to enter settings in the PaperCut

administration interface and also the Sharp Copier's web interface. Please note that

the settings will be slightly different for OSA version 3 than older OSA versions.

2.5.1 PaperCut Setup

1. Log in to the PaperCut administration interface using a web browser (e.g.

http://papercut-server:9191/admin ).

2. Navigate to ‘Options -> Advanced’ and ensure the option ‘Enable external

hardware integration’ is enabled.

3. Press ‘Apply’.

2.5.2 Sharp External Settings for OSA Version 3 (or higher)

1. Please only do these steps if you are running OSA Version 3+, otherwise

please follow the steps in appendix C.

2. Log in to the copier’s web interface as an administrator using a web browser

(e.g.http://copier-ip/ ).

3. Navigate to ‘User Control-> Card Type /Card Reader settings’ and ensure

that ‘User IC Card for Authentication‘ is unchecked. (If your Sharp device