User manual

PaperCut - Sharp OSA Manual 2014-12-24

7. Under ‘Address for Application UI’, enter:

http://<server-ip>:9191/device/sharp_osa/ui/

replacing ‘server-ip’ with the IP address of the PaperCut server

8. Under ‘Address for Web Service’, enter:

http://<server-ip>:9191/device/sharp_osa/soap?name=Level1+Copier

where “Level1+Copier” is the name of the device that will appear in PaperCut. This

may be replaced with a custom name, such as a name based on the MFD’s physical

location. Using the same name as the copier’s print queue is recommended.

IMPORTANT: Do not use spaces in the device name in the URL. Spaces may

be represented by using a plus (+) character.

9. The timeout value should be set to 30 seconds. This defines how long the copier will

wait before an error is displayed if the server is down or unavailable.

10. Press “Submit”, and then press “Reboot Now”. The reboot process will take 30

seconds to 1 minute.

If you receive an error like “ERROR[5000]: Processing is in motion. This function

cannot be executed.” then check the display panel of the device and ensure the

“COPY” tab is selected. Other tabs may lock parts of the web admin interface.

11. Please remember to go back and continue with the Sharp Miscellaneous Settings.