Operation Manual

208
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO: Disables auto cutter function.
ct “NO.”
• PAPER SHEET (Use the selective entry)
Select a paper type.
TWO OR MORE: Uses two or more sheets.
ONE SHEET: Uses one sheet.
NOTE
This option is available when the “TM-300” is selected.
• HEAD LOGO PRINT (Use the selective entry)
Select a header logo print timing.
EACH ISSUE: The logo will be printed on the receipt just
after the current transaction is finalized.
PRE-PRINT: The logo will be printed beforehand on the
next receipt when the current transaction is
finalized.
• RCPT LENGTH (Use the numeric entry)
Minimum length of the bill to be printed paper on the receipt
paper
• PRINT TYPE (Use the selective entry)
Select the type of receipt print formats.
ADDITION SINGLE/DOUBLE
S/D + ADDITION ADDITION+SINGLE
ADD WITHOUT TL DOUBLE ADDITION
DOUBLE ADD+SNGL
■ Receipt printer (continued)
Procedure
■ Slip printer
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter “0” for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as “0”, no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
ER-FBP40 TM-T88/85/88(3)
TM-295 TM-T88(3) + LOGO
TM-U950
• INITIAL FEED# (Use the numeric entry)
Initial line feed for a slip (0 to 64 lines)
• SLIP MAX LINE (Use the numeric entry)
Maximum number of lines printable on a slip (0 to 99)