Operation Manual

134
Programming
This chapter explains how to program various items.
Before you start programming, select the PRICE, PGM1, PGM2, or
AUTO KEY mode from the mode selection window depending on the
item you are going to program.
Basic Instructions
This section illustrates the basic programming by using an example of programming for departments.
■ Programming example
The following example shows how to program 2.00 for the unit
price, “ABCDE” for the description, and the scale entry to be
enabled for department 1.
1. In the PGM2 MODE window, select “2 SETTING” by using
the or key and touch the key.
• The SETTING window will appear.
NOTE
• You can also select “2 SETTING” simply by touching a
corresponding line in the window.
• You can also select “2 SETTING” by touching the and
keys.
• If you return to the previous screen, touch the key.
2. Select “1 ARTICLE.”
• The ARTICLE window will appear.
NOTE
The mark (▼) in the lower-right corner of the window shows that
the window contains more options than are now on the screen.
To scroll the window, touch the key.
To return to the previous page, touch the key.
3. Select “1 DEPT.”
• The DEPT window will appear, listing programmable
departments.
13
Procedure
PGM1 MODE
PGM2 MODE
AUTO KEY MODE
PRICE MODE
UP33_07.p65 3/22/99, 11:52 AM134