Product specifications

PERIPHERALS
Sharp Electronics Corporation
LS1004 Programming Barcodes
The following options need to be set on the scanner. Please consult your bar code scanner
documentation to obtain the barcodes to program the scanner. Scan the codes in the
following order:
1. Set RS-232C Host
2. Standard RS-232 Host Type
3. Continuous
4. Disable All Code types
5. Enable UPC/EAN
6. Do Not Transmit UPC-A Check Digit
7. Do Not Transmit UPC-E Check Digit
8. Decode UPC Only Disable
9. Do Not Convert UPC-E to UPC-A
10. Ignore UPC/EAN Supplementals
11. Disable EAN Zero Extend
12. System Character
13. Disable Code 128
14. Do Not Verify Code-39 Check Digit
15. Disable Code 39 – Full ASCII
16. Disable Code 93
17. Disable Code I 2 of 5
18. Disable Code D 2 of 5
19. Disable Codabar
20. Disable CLSI Editing
21. Transmit Code ID Character
22. Prefix STX
23. Suffix CR
24. 4800
25. Odd
26. 7-Bit
27. 1 Stop Bit
28. RTS/CTS
29. None (Parity)
Page 98 of 246