Product specifications

PERIPHERALS
Sharp Electronics Corporation
Epson TM-T88 (2):
Switch Settings
TM-T88(3)
Switch Contents ON OFF
UP-3301
Requirements
SW1-1 Data Receive error Ignored Prints “?” OFF
SW1-2 Receive Buffer Capacity 45 bytes 4 Kbytes OFF
SW1-3 Handshaking XON/XOFF DTR/DSR OFF
SW1-4 Data Word length 7 bits 8 bits OFF
SW1-5 Parity Check with Parity without Parity OFF
SW1-6 Parity selection Even Parity Odd Parity OFF
SW1-7 Transmission Speed (*1)
ON
(9600)
SW1-8 Transmission Speed (*1) OFF
SW2-1 Busy Condition Buffer Full – Off Line Buffer Full – Printer error OFF
SW2-2 Do Not Change -- -- OFF
SW2-3 Print Density/Low power (*2) OFF
SW2-4 Print Density/Low power (*2) OFF
SW2-5
Release condition of
Receive error
Remaining receive buffer
capacity reaches 138
bytes
Remaining receive buffer
capacity reaches 256
bytes
OFF
SW2-6 Do Not Change -- -- OFF
SW2-7 Do Not Change -- -- OFF
SW2-8 Do Not Change -- -- OFF
(*1) Baud Rate selection
Rate SW1-7 SW1-8
1200 ON ON
4800 OFF ON
9600 ON OFF
19200 OFF OFF
(*2) print Density selection
Level SW2-2 SW2-3
Low power consumption mode ON ON
1 (Normal) OFF OFF
2 (Medium) ON OFF
3 (Dark) OFF ON
Data Transmission Format
• 7 bits ASCII code
• One Start bit
• Even Parity
• One Stop bit
• Baud Rate: 9600 bps asynchronous
Page 87 of 246