Product specifications

PERIPHERALS
Sharp Electronics Corporation
4. Validation Printer setup
A Validation Printer may be added to the UP800 configuration to allow for the VP Text
Message e.g. FOR DEPOSIT ONLY.
Only the Epson TM-295 series printers may be used as a Validation Printer.
Procedure
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [01 DEVICE CONFIG]
③ Select [07 VALIDATION (VP)]
④ Enter the desired Terminal # and/or Channel # and choose the desired parameters:
° Printer Name (Type) Å to view the available printers depress the [DECIMAL or SBTL] key
° VP Times (0-9)
⑤ Depress the [CASH] key when all settings are completed
The menu will return to the Device Config Sub-Menu
⑥ Depress the [CANCEL] key to return to the SRV Mode Setting Sub-Menu
NOTE: When “ALL” devices are assigned to the desired Channel No., it is recommended
that a PROGRAM Reset be performed.
Assignment Method: The CHANNEL NO. Assignment is required at the machine
where the printer is physically connected. For the Inline configuration – the
TERMINAL and CHANNEL of the machine where the printer is physically located is
required.
Please consider the general rules listed below when using this feature:
• A printing device can not be assigned to a Channel where a non-printing device is
already assigned (ex: SCALE).
Page 83 of 246