Product specifications

PERIPHERALS
Sharp Electronics Corporation
2. BILL Printer setup
A BILL printer may be added to the UP800 configuration for printing Guest checks. The
selected Epson series printers may be used and setup as outlined below:
Procedure
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [01 DEVICE CONFIG]
③ Select [05 BILL PRINTER]
④ Enter the desired Terminal # and/or Channel # and choose the desired parameters:
° Printer Name (Type) Å to view the available printers depress the [DECIMAL OR SBTL] key
° Auto Cutter Yes/No
° Initial Feed # = 02 min.
° Slip Max Line = 32 or 36 to prevent the printer from going into an endless
loop.
⑤ Depress the [CASH] key when all settings are completed
The menu will return to the Device Config Sub-Menu
⑥ Depress the [CANCEL] key to return to the SRV Mode Setting Sub-Menu
NOTE:
When “ALL” devices are assigned to the desired Channel No., it is recommended that a
PROGRAM Reset be performed.
Assignment Method: The CHANNEL NO. Assignment s required at the machine
where the printer is physically connected. For the Inline configuration – the
TERMINAL and CHANNEL of the machine where the printer is physically located is
required.
Please consider the general rules listed below when using this feature: A printing device
cannot be assigned to a Channel where a non-printing device is already assigned (ex:
SCALE).
Page 80 of 246