Product specifications

PERIPHERALS

Sharp Electronics Corporation

1. Entering SRV-Mode/Program Reset

To enter SRV Mode programming or to perform a program reset, you must toggle the Reset

Switch to the on or forward position and then back to the original off position.

Procedure:

① Unscrew the plate covering the Reset Switch to gain access

② Set the Reset Switch to the “ON” or forward position

③ Set the Reset Switch to the “OFF” or original position.

④ Reattach the plate covering the Reset Switch.

The SRV-mode Main Menu will appear:

2. SRV-mode Program Readings:

List of SRV-mode Program Reports:

Device Config

Mode Main Menu Sub Menu

SRV-Mode 1 READING 2 DEVICE CONFIG

Procedure:

(1) Enter the SRV-Mode as previously outlined

(2) Select [1 READING]

(3) Select [2 DEVICE CONFG]

(4) Choose [1 DISPLAY] to view the report on the display, or [2 REPORT PRINTER] to

generate a hard-copy report.

Caution:

When adding peripheral devices, it is critical not to assign more than 1-type device to the

same channel no. Please verify that multiple type devices are not assigned to the same