Product specifications

SYSTEM PRESETS
Sharp Electronics Corporation
Section-1: Overview
SRV-mode programming consists of service programming jobs, which define the UP-800
system capabilities. The service program settings may be printed on the report and journal
printer or displayed on the operator display.
1. SRV-mode Program Main Menu:
SRV-mode Program Main Menu:
Main Menu Description
1 READING
Print or view system preset, device configuration, free key, file, and SSP
settings.
2 SETTING
Program device configuration, system preset, Z counter, GT, mode
secret #, free key, file, supervisor, memory initial, SSP settings or
perform backup send and backup receive operations.
3 IRC SETTING
Program satellite, master, and backup master, standalone with IRC and
stand alone terminal settings or perform an IRC reset.
4 DOWN LOAD
In an IRC system, transfer SRV parameters (system presets) and free
key program settings from a master terminal to all or an individual
satellite terminal on the existing IRC network.
5 DIAGNOSTIC
Perform product&test, ram&rom&ssp, lock&key&switch, serial I/O,
display&printer, mcr&drawer, TCP/IP diagnostic testing. Please refer to
the Service Manual for requirements and possible results.
6 SD CARD MODE Perform SD card Load/Save operations.
For more information on SRV Mode programming please see the UP-810F, UP-820N, UP-
820F Service Programming Manual. Documentation is available on www.sharp-pos.com.
Page 7 of 246