Product specifications

FILE ALLOCATION
Sharp Electronics Corporation
Listed below are some things to consider when using this function:
• The recommended setting for File Group #50: KP (IRC) is 9
• File Group #56: REG BUFFER controls File Group #49: KP BUFFER
T-Log Buffer (File Group #59)
File Group No. 59: T-LOG BUFFER is the file allocated in certain configurations where a
Back Office application collects the T-Log data for processing. The T-Log (Transaction
Log) data collects and stores sales entry data made in the REG and MGR modes. To
modify this file in memory you must allocate the T-LOG BUFFER file as follows:
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [08 FILE]
③ Select [06 OTHER]
④ Select [59 T-LOG BUFFER]
⑤ Enter “0” to delete (followed by “YES” at the prompt) or enter the Records and follow by
depressing the [ENTER] key.
Allocation Method: File Group #45: T-LOG BUFFER is allocated at the Standalone,
Master and Satellite and is controlled by SRV Job#923-C.
Listed below is an example how to calculate the Record setting for this function:
Examples: Calculation
Satellite (Avg. No. Items) x (No. Transactions)
Master (Avg. No. Items) x (Total No.
Transactions)
Listed below are some things to consider when using this function:
• For the Inline configuration, the T-LOG BUFFER file allocation is used
• The actual setting for the T-Log When a terminal is a Satellite, do not modify this file –
the system will upon the IRC SETTING
Page 65 of 246