Product specifications

FILE ALLOCATION
Sharp Electronics Corporation
Auto GLU Generate (File Groups #44)
File Groups No. 44: AUTO GLU GENERATE. This is the file that is allocated when it is
desired to generate the GLU (Guest Check) numbers automatically. The allocation for
these files can be calculated as follows:
No. File Group Calculation
44 Auto GLU
Generate
Index from File Group #42: GLU/PBLU (ALL) + 1
To create these files in memory you must allocate them as follows:
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [08 FILE]
③ Select [05 GLU]
④ Select [44 AUTO GLU GENERATE]
⑤ Enter “0” to delete (followed by “YES” at the prompt) or enter the Records and follow
each by depressing the [ENTER] key.
Allocation Method: File Group #44: AUTO GLU GENERATE is allocated at the
Standalone, Master, Satellite and Backup Master.
Listed below are some things to consider when using this function:
• The GLU number range is preset in PGM2 (e.g. 1 – 100)
• The number generated will be the lowest available number within the range
KP Buffer and KP(IRC) (File Groups #49 and #50)
File Groups No. 49: KP BUFFER and File Group No. 50: KP(IRC) work together to provide
a maximum of (9) Kitchen printers with a buffer allocated to provide Inline system printer
routing between terminals. To change this file in memory you must modify the KP as
follows:
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [08 FILE]
③ Select [06 OTHER]
④ Select [49 KP BUFFER]
⑤ Enter “0” to delete (followed by “YES” at the prompt) or enter the number of KP (kitchen
printers) and follow this by depressing the [ENTER] key.
Allocation Method: File Group #49 and #50: KP and KP BUFFER are to be allocated
the same at the Standalone, Master and Satellite.
Page 64 of 246