Product specifications

FILE ALLOCATION
Sharp Electronics Corporation
Servers (File Group #38)
The Server File is mandatory for operating the UP-800 system. In order to make sales
entries a Server must be signed on to the POS terminal. The server file is a fixed-type
allocation and when reports are issued, all servers are printed. To change this file in
memory you must modify the Server file as follows:
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [08 FILE]
③ Select [04 PERSONNEL]
④ Select [38 SERVER]
⑤ Enter “0” to delete (followed by “YES” at the prompt) or enter the number of Server
records and follow this by depressing the [ENTER] key.
Allocation Method: File Group #38: SERVER is to be allocated at the Standalone,
Master and Backup Master.
Listed below are some things to consider when using this function:
• The maximum number of Servers is 255
• It is mandatory to have Servers allocated. Do not delete this file
• For the Inline configuration, the Server system is centralized at the Master
• When a terminal is a Satellite, do not modify this file – the system will modify/set this
file allocation upon the IRC SETTING
• Secret coded Servers are a preset 4-digit code in PGM mode
• When a Back-Up Master is part of the In-Line configuration, then it is necessary to
allocate the Server related File Groups to the same number of records as the Master.
• Only one Server may be signed on at any terminal at a time
• The UP-800 employs two types of Server systems;
o 1
st
: Auto sign on/off system
(Servers are automatically signed off when the transaction is finalized)
o 2
nd
: Stay-down system
(Servers can be signed and remain signed on until physically signed off)
Page 58 of 246