Product specifications

FILE ALLOCATION
Sharp Electronics Corporation
Dynamic UPC Price Shifts (File Groups #19, #20)
The UP-800 UPC file may have one of two types of Dynamic UPC Price Shifts – File
Group No. 19: Dynamic PRICE 1 or File Group No. 20: Dynamic PRICE 1 – 6. The
default allocation uses Dynamic Price 1. If multiple price shifts are required, you may
delete File Group #19 - Dynamic Price 1 and create File Group # 20 Dynamic Price 1-6.
NOTE: Dynamic UPC Price shift 1-6 will accumulate more memory.
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [08 FILE]
③ Select [02 ITEMS]
④ Select [19 DYN. UPC PRICE1 ]
⑤ Toggle the record selection to “ERASE” (depress the [.] key) followed by depressing the
[ENTER] key.
⑥ Select [20 DYN. UPC PRICE 1-6]
⑦ Insure the record selection is set to “CREATE” and follow this by depressing the
[ENTER] key.
Allocation Method: File Group #19 or #20: DYNAMIC UPC PRICE 1 or (1 to 6) is
allocated based on the number of DYN UPC items in File Group #18 and must be the
same type at the Standalone, Master and Satellite.
Dynamic UPC Text (File Groups #18, #19, #21, #22)
The default allocation uses 16 characters for DYNAMIC UPC PRICE 1. If multiple Price
shifts required If memory permits, then delete the File Group No. 21: DYNAMIC UPC
TEXT1 (8) to allow allocation of File Group No. 24: DYNAMIC UPC TEXT1 – 6 (8).
Dynamic UPC KP Text (File Groups #20, #23)
To use a description other than the DYN.UPC Text descriptor to print on a remote printer,
the Dynamic UPC KP Text file may be used.
Page 55 of 246