Product specifications

FILE ALLOCATION
Sharp Electronics Corporation
PLU/UPC Stock (File Group #15)
It is possible to report PLU/UPC stock levels by each PLU when File Group No. 15: PLU
STOCK has been allocated. The file is allocated based on the number of records allocated
in File Group No. 5: PLU/UPC. To create this file in memory you must create the PLU
STOCK file as follows:
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [08 FILE]
③ Select [02 ITEMS]
④ Select [15 PLU STOCK]
⑤ Insure the record selection is set to “CREATE” and follow this by depressing the
[ENTER] key.
Allocation Method: File Group #14: PLU STOCK must be allocated at the Standalone,
Master and Satellite.
Please consider the general rules listed below when using this feature:
• For the In-Line Configuration, stock keeping is updated by batch processes and not
kept in real-time.
Dynamic UPC (File Group #18)
File Group #15 is the “parent” File Group in which the total number of DYN.UPC records is
set. Dynamic UPC (also known as the UPC Learning Function) allows you to register a
UPC that has not been programmed in the PLU/UPC file. The UPC is added to the
Dynamic UPC file memory space, for temporary storage or for a later upload to the
PLU/UPC file. This can assist with the register traffic flow and prevent unwanted and
inaccurate items from being added to the PLU/UPC file.
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [08 FILE]
③ Select [02 ITEMS]
④ Select [18 DYN.UPC]
⑤ Enter the desired number of PLU items (00000 – 99999)
⑥ Depress the [ENTER] key
Page 54 of 246