Product specifications

FILE ALLOCATION
Sharp Electronics Corporation
⑤ Toggle the record selection to “ERASE” (depress the [.] key) followed by depressing the
[ENTER] key.
⑥ Select [09 PLU PRICE 1-6 (8)]
⑦ Insure the record selection is set to “CREATE” and follow this by depressing the
[ENTER] key.
Allocation Method: File Group #9, #10, #12 or #13: PLU TEXT (8) or (16) must be
consistent with the PLU/UPC Price(s). The number of records allocated is based on
File Group #5 and must be allocated to the same type at the Standalone, Master and
Satellite.
E.g. If you choose the MRS setting of File Group #7 (PLU/UPC Price 1), you must select
PLU/UPC Text Files Groups 9 (PLU/UPC Text1 (8)) or 10 PLU/UPC Text1 (16) - MRS.
PLU KP Text (File Groups #11, #14)
If you wish to use a description other than the PLU text descriptor to print on the remote
printers, the PLU KP text file may be used.
The UP-800 PLU file may have one of two types of PLU KP Text – File Group No. 11: PLU
KP Text 1 (12) or File Group No. 14: PLU KP Text 1 – 6 (12). The File Group used must
be consistent with the PLU Price and Text used. Price 1 use Text 1 or Price 1-6 use Text
1-6
NOTE: PLU KP Text 1-6 will accumulate more memory.
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [08 FILE]
③ Select [02 ITEMS]
④ Select [14 KP TEXT 1 – 6]
⑤ Toggle the record selection to “ERASE” (depress the [.] key) followed by depressing the
[ENTER] key.
Allocation Method: File Group #11, #14: KP-TEXT1 or KP-TEXT 1-6. The number of
records allocated is based on File Group #5 and must be allocated to the same type
at the Standalone, Master and Satellite.
Page 53 of 246