Product specifications

FILE ALLOCATION
Sharp Electronics Corporation
Department Text (File Groups #2, #3)
There are 2 different lengths for text characters for departments. The default allocation
uses 16 characters and if memory permits, the File Group No. 3: Dept Text (16) can be
deleted to allow allocation of File Group No. 2: Dept Text (8).
Procedure:
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [8 FILE]
③ Select [01 DEPARTMENT]
④ Select [03 DEPT TEXT (16)]
⑤ Toggle the record selection to “ERASE” (depress the [.] key) followed by depressing the
[ENTER] key.
⑥ Select [02 DEPT TEXT (8)]
⑦ Insure the record selection is set to “CREATE” and follow this by depressing the
[ENTER] key.
Allocation Method: File Group #2 or #3: DEPT TEXT (8) or (16) is allocated to the
same type at the Standalone, Master and Satellite and follows the File Group #1:
DEPT settings
Page 50 of 246