Product specifications

FILE ALLOCATION
Sharp Electronics Corporation
1. Entering the SRV-Mode/Program Reset
To enter SRV Mode programming or to perform a program reset, you must toggle the Reset
Switch to the on or forward position and then back to the original off position.
Procedure:
① Unscrew the plate covering the Reset Switch to gain access
② Set the Reset Switch to the “ON” or forward position
③ Set the Reset Switch to the “OFF” or original position.
④ Reattach the plate covering the Reset Switch.
The SRV-mode Main Menu will appear:
2. SRV-mode Program Readings:
List of SRV-mode Program Reports:
Device Assignment
Mode Main Menu Sub Menu
SRV-Mode 1 READING 4 FILE
Procedure:
① Enter the SRV-Mode as previously outlined
② Select [1 READING]
③ Select [4 FILE]
④ Choose [1 DISPLAY] to view the report on the display, or [2 REPORT PRINTER] to
generate a hard-copy report.
Caution:
When adding the optional memory board (UPS04MB2), (UPS08MB), it’s necessary to
execute one of the Master Reset procedures outlined in Section – 1.
Example: Master Reset-1, Master Reset-2, and Master Reset-3
Page 46 of 246