Product specifications

FREE KEY LAYOUT
Sharp Electronics Corporation
Section-2: Free Key Layout Readings
1. Entering SRV-Mode
To enter SRV Mode programming or to perform a program reset, you must toggle the Reset
Switch to the on or forward position and then back to the original off position.
Procedure:
① Unscrew the plate covering the Reset Switch to gain access
② Set the Reset Switch to the “ON” or forward position
③ Set the Reset Switch to the “OFF” or original position.
④ Reattach the plate covering the Reset Switch.
The SRV-mode Main Menu will appear:
CAUTION:
SRV Mode may be entered even though the Standby Switch is not set to the “ON” position.
Once SRV Mode is exited, no operation is possible unless the Standby Switch is in the
“ON” position.
Page 36 of 246