Product specifications

SD Card Utilities
Sharp Electronics Corporation
Section-1: Overview
The UP-800 POS Terminal has a SD Memory card slot which is used for saving or loading
the terminals data. In order to access the SD Functions, you will need to be in SRV Mode.
The SD Card slot is located on the right hand side of the unit.
NOTE:
This model supports SD cards only. The use of any other types of SD cards, such as
miniSD, microSD, etc. with an adapter, is not supported.
1. Formatting the SD memory card:
You can format the SD card from the UP-800. Please note that you can format a SD card
using a PC.
Warning: Formatting the SD card will erase all of the data on the SD card.
Procedure:
• Perform a PROGRAM RESET to enter SRV mode. (Toggle the RESET switch located
on the right hand side of the unit.)
• Press [6 SD CARD MODE]
• Select [5 FORMATTING]
• At the “Are You Sure Prompt” prompt, choose [1.YES]
2. Folder Names and Folder Creation
Folder Names are used for file/folder structure. Folder names can be up to 8 characters
long. Please note that alphanumeric characters can be used.
Each individual program will need to have a unique folder name. If the same folder name is
used, your program will be overwritten.
Procedure:
• Perform a PROGRAM RESET to enter SRV mode. (Toggle the RESET switch located
on the right hand side of the unit.)
• Press [6 SD CARD MODE]
• Select [3 FOLDER CONTROL]
• Select [1 FOLDER NAME]
• Enter the desired folder code and press [ENTER]
• Press [2 FOLDER CREATE]
• At the “Are You Sure Prompt” prompt, choose [1.YES]
Page 243 of 246