Product specifications

EFT&GIFT CARD
Sharp Electronics Corporation
Quick Setup
The following table summarizes the quick set up procedure for the UP-800. It assumes that
the DataTran has been received with the merchant parameters loaded or that the DataTran
has been loaded with a Demo program.
Step ECR Mode Action Related Preset
1 Install all Options (RAM, Etc.)
2
Off
Connect all Peripherals
(DataTran, etc.)
3 Master Reset
Depress [MASTER RESET1]
and enter the password:
"11111111" and wait for to SRV.
4 Set Device Configuration
2 SETTING, 01 DEVICE
CONFIG. 17 EFT, 18 PINPAD,
27 IC CARD
5 Set System Presets
2 SETTING, 02 SYSTEM
PRESETS, JOB#902, JOB#916,
JOB#918, JOB#921
6 Set Free Key Layout 2 SETTING, 06 FREE KEY
7
SRV
Allocate Memory
2 SETTING, File Allocation -
Closed GLU
8 Set EFT presets
15 EFT SETTING, 1 EFT
PRESET
9 Set Pin Pad presets 15 EFT SETTING, 3 PIN PAD
Department/PLU Programming
(Gift Card)
02 SETTING, 01 ARTICLE
10 Set Media Key presets
2 SETTING, 05 MEDIA, 01
CASH, 02 CHECK, 03 CHARGE
11
PGM2
Initialize DataTran
15 EFT SETTING, 2 EFT
PRESET, 1 INITIALIZE
Page 241 of 246