Product specifications

EFT&GIFT CARD
Sharp Electronics Corporation
⑥ This will automatically start to print a record of the change
⑦ Depress [CANCEL] to exit and return to REG-mode
CAUTION:
The Change Batch operation is executed under certain circumstances such as when the
storeowner changes the type processor to be used for settlements. Only execute this job
when informed to do so.
Print Example:
CHANGE BATCH message is printed
6. DataTran Dial Out:
Procedure:
Press the [MODE] key and choose [06 PGM2 MODE]
① Select [15 EFT SETTING]
② Select [1 EFT]
③ Select [2 DIAL OUT] The UP-800 will initiate the Dial Out operation
④ Depress [CANCEL] to exit and return to REG-mode
When the load is complete the version message is printed on the journal printer
NOTE:
The Dial Out operation may be executed when the merchant’s file (TEL ID) is preset in the
memory of the UP-800.
IMPORTANT:
Extra charges may apply - please verify the type of service you are eligible for.
7. DataTran Dial In:
Procedure:
Press the [MODE] key and choose [06 PGM2 MODE]
Page 218 of 246