Product specifications

EFT&GIFT CARD
Sharp Electronics Corporation
Section-4: DataTran Functions
When implementing the DataTran modem, select functions have been incorporated to allow
for remote support and management of EFT enabled terminals.
Incorporated Functions:
The following list of functions has been implemented in the UP-800 POS terminal:
Function Description for Usage
Used after installation is complete
Initialization
Used to initialize the DataTran whenever power is removed
Open Batch
When terminal-based processors used: must be accomplished
daily prior to accepting credit cards for that business day
Close Batch
When terminal-based processors used: must be accomplished
daily in order to settle credit card sales transaction at the host
Dial Out
When the Tel No. and Tel ID are preset: this is used to dial out to
Datacap’s host to download the merchant parameter file
Dial In
Places the DataTran into an access state where remotely
Datacap may dial into the terminal to load a merchant parameter
file
1. DataTran Initialization:
Procedure:
Press the [MODE] key and choose [06 PGM2 MODE]
① Select [15 EFT SETTING]
② Select [1 EFT]
③ Select [1 INITIALIZE]
④ Depress [CANCEL] to exit and return to REG-mode
NOTE:
The Initialize operation does not affect the DataTran totals and may be executed whenever
necessary to insure proper operations.
IMPORTANT:
Once the POS and EFT settings have been completed and the equipment is connected, it is important
that the DataTran unit be initialized. It is also important to remember that the Initialization function should
be conducted every time AC power is removed from the DataTran unit.
2. DataTran Open Batch:
Page 214 of 246