Product specifications

EFT&GIFT CARD
Sharp Electronics Corporation
Assignment Method:
For terminal-based host systems (batch operations required), it is recommended to select a
single CHECK media key when settling personal checks to simplify operations for the
operator.
Please consider the general rules listed below when using this feature:
• When the Tip Line is not desired, then preset Sign. Line Print = No
• Preset the Footer Print related programming in SRV Job#911-C = “+1”
• Enable Footer Print = Enable for the Media key preset
Debit Finalization Keys (w/ PIN entry):
The UP-800 can support end user requirements that also include processing debit card transactions that
require PIN data entry using Datacap's Peripheral Device Controller in conjunction with the VeriFone 1000
PIN pad.
For this example in programming a media key to be used as a Debit settlement, a CASH2 media key will
be used.
Debit transactions are immediate and are not part of any batch operations.
Procedure:
Enter the PGM2-Mode by depressing the [MODE] key and selection [6 PGM2 MODE]
① Select [02 SETTING]
② Select [05 MEDIA]
③ Select [1 CASH]
④ Select the [2 CASH2] media key to be used for Debit payments
⑤ Enter the desired parameters and at minimum, set the following parameters:
• EFT/ACCT PROG. EFT Compulsory
• EFT: Dial
• EFT TYPE: Debit
• Card# Print: Yes or No
• Card# Format: Full or Partial
• Sign. Line Print: Yes or No
• Card Holder Print: Yes or No
• Expiration Date Print: Yes or No
• Number of Receipts: 0 – 9 (usually 2)
• Tip Line Print Yes or No
⑥ Depress [CA/AT] when all settings are completed to exit to the PGM2 Cash Sub-Menu
⑦ Depress [CANCEL] to exit the Cash Sub-Menu and return to the Media preset menu
NOTE:
Repeat steps 4 thru 7 for each subsequent cash settlement key to be programmed as a
debit finalization key.
Page 211 of 246