Product specifications

EFT&GIFT CARD
Sharp Electronics Corporation
④ Select the desired Charge media key(s) to be used for Credit Cards (CHARGE1 –
CHARGE9)
⑤ Enter the desired parameters and at minimum, set the following parameters:
• EFT/ACCT PROG. EFT Compulsory
• EFT: Dial
• EFT TYPE: Credit
• Card# Print: Yes or No
• Card# Format: Full or Partial
• Sign. Line Print: Yes or No
• Card Holder Print: Yes or No
• Expiration Date Print: Yes or No
• Number of Receipts: 0 – 9 (usually 2)
• Tip Line Print Yes or No
NOTE: If you are utilizing the Edit Tip function, you will need to set the ‘CLOSED CG’
parameter to RETAINED
NOTE:
If you are using the IC CARD device, set the IC CARD parameter to YES
⑥ Depress [CASH] when all settings are completed to exit to the PGM2 Charge Sub-Menu
⑦ Depress [CANCEL] to exit the Charge Sub-Menu and return to the Media preset menu
NOTE:
Repeat steps 4 thru 7 for each subsequent charge card to be programmed as a credit card
finalization key. Only one charge media is required.
Assignment Method:
For terminal-based host systems (batch operations required), it is recommended to select a
single CHARGE media key when settling credit cards to simplify operations for the
operator. The individual Credit Card totals are provided upon the EFT reports.
Please consider the general rules listed below when using this feature:
• Preset the Footer Print related programming in SRV Job#911-C = “+1”
• Enable Footer Print = Enable for the Media key preset
• Partial tenders are required, the Charge media key must be preset as ‘Amount Tender =
Compulsory”
Check Card Finalization Keys:
Page 209 of 246