Product specifications

EFT&GIFT CARD
Sharp Electronics Corporation
Department and PLU Programming Settings (Gift Card):
Procedure:
Enter the PGM2-Mode by depressing the [MODE] key and selection [6 PGM2 MODE]
① Select [02 SETTING]
② Select [01 ARTICLE]
③ Select [01 DEPARTMENT]
④ Create two new departments or select departments which are not being utilized. At a
minimum:
a. For the first department, set its Department Type to GIFT and set the other
parameters accordingly.
b. Set the other department’s Department Type to GIFT RELOAD and set the
other parameters accordingly. Press [CANCEL] to return to the Article menu.
Refer to the Instruction Manual for programming departments.
⑤ Select [02 PLU/UPC]
⑥ Create two new PLUs or select two available PLUs. At a minimum:
a. For the first new PLU, change its text to Gift Card Activate (or whatever you
prefer) and link it to the newly created GIFT department (step 4). For the PLU’s
pricing, set its Entry Type to Open.
b. For the 2
nd
PLU, change its text to Gift Card Reload (or whatever you prefer) and
link it to the newly created GIFT RELOAD department (step 1). For the PLU’s
pricing, set its Entry Type to Open.
6. Media Key programming:
The media key initiates communications to the DataTran unit based on the presets entered during setup.
The below procedures are separated by the type media key:
Credit Card Finalization Keys:
There are 2 methods in which to set the system for credit card finalization:
Method-1: for simplified operations:
It is possible to provide a single Credit Card key and rely on the DataTran terminal to track the individual
credit card's totalizers.
Method-2: for detailed operations:
It is possible to provide a media key for each type of credit card at the POS terminal and cross
check the machine's totalizers against the DataTran.
Procedure:
Enter the PGM2-Mode by depressing the [MODE] key and selection [6 PGM2 MODE]
① Select [02 SETTING]
② Select [05 MEDIA]
③ Select [03 CHARGE]
Page 208 of 246