Product specifications

EFT&GIFT CARD
Sharp Electronics Corporation
PIN Pad Settings:
Procedure:
Enter the PGM2-Mode by depressing the [MODE] key and selection [6 PGM2 MODE]
① Select [15 EFT SETTING]
② Select [2 PIN PAD]
③ Set the following parameters time-out values as shown below followed by depressing the [ENTER] key
o TIMEOUT1 = 010
o TIMEOUT2 = 099
o BAUD RATE = 9600 bps
④ Depress the [ENTER] key to finalize the settings
⑤ Depress [CANCEL] when at the EFT SETTING sub-menu to exit to the PGM2 Main-
Menu
NOTE:
The PIN Pad settings are preset to the recommended settings from MRS Defaults
Page 207 of 246