Product specifications

EFT&GIFT CARD

Sharp Electronics Corporation

PIN Pad

The PIN Pad device may be added to the UP-800 configuration when Debit Card w/ PIN

entry functions are required. The Datacap Peripheral Device Controller and VeriFone PIN

pad 1000 is used for the PIN entry device and may be setup as outlined below:

Procedure

Enter the SRV-Mode as outlined in Section -1

① Select [2 SETTING]

② Select [01 DEVICE CONFIG]

③ Select [18 PIN PAD]

④ Enter the desired Channel# followed by depressing the [ENTER] key

⑤ Depress the [CASH] key when all settings are completed

The menu will return to the Device Config Sub-Menu

⑥ Depress the [CANCEL] key to return to the SRV Mode Setting Sub-Menu

NOTE:

When the PIN Pad device is assigned to the desired Channel No., it is recommended that a

PROGRAM Reset be performed.

Assignment Method:

The CHANNEL NO. assignment is required at every machine where the PIN Pad device

(Peripheral Device Controller) is physically connected.

Please consider the general rules listed below when using this feature:

• No other device can be assigned to a Channel where a the Peripheral Device

Controller is already assigned (ex: SCALE)

IC Card