Product specifications

EFT&GIFT CARD
Sharp Electronics Corporation
1. Device Assign Settings
The SRV-mode programming of the UP-800 consists of Device Assignment, System
Presets, Free Key layout and File Allocation. The recommended settings are described
below:
EFT
The EFT device may be added to the UP-800 configuration when EFT functions are
required. The DataTran modem is used for the EFT device and may be setup as outlined
below:
Procedure
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [01 DEVICE CONFIG]
③ Select [17 EFT]
④ Enter the desired parameters followed by depressing the [ENTER] key
⑤ Depress the [CASH] key when all settings are completed
The menu will return to the Device Config Sub-Menu
⑥ Depress the [CANCEL] key to return to the SRV Mode Setting Sub-Menu
NOTE:
When the EFT device is assigned to the desired Channel No., it is recommended that a
PROGRAM Reset be performed.
Assignment Method:
The CHANNEL NO. assignment is required at the machine where the EFT device is
physically connected. For the Inline configuration – the TERMINAL and CHANNEL of the
machine where the DataTran modem is physically located is required
Please consider the general rules listed below when using this feature:
• No other device can be assigned to a Channel where a the EFT device is already
assigned (ex: SCALE)
Page 200 of 246