Product specifications

SYSTEM PRESETS
Sharp Electronics Corporation
System Preset: 909
Bit Description Data MRS
Training GT is printed on the Trans.-X Report Yes/No 2/0
A
Training GT is printed on the Trans.-Z Report No/Yes 1/0
Enter the SUM of the Desired Values ----^
2
B PLU/UPC Item Data is printed on the Z Report No/Yes 4/0
Enter the Desired Value ----^
0
VOID-mode & MGR VOID is printed on the Trans.-Z2 Report No/Yes 4/0
C
VOID-mode & MGR VOID is printed on the Trans.-Z1 Report No/Yes 2/0
Enter the SUM of the Desired Values ----^
0
D ---- Not used. Fixed at ‘0’ --- 0
NOTE:
-909-B: No Sales Data is printed for the PLU-Z Report when = 4
System Preset: 910
Bit Description Data MRS
A The Cash Drawer opens at Server Sign-On Yes/No 2/0
Enter the Desired Value ----^
0
B ----Not used. Fixed at ‘0’ --- 0
C Server/Cashier Sign-on System Auto Sign-Off/Stay-Down 2/0
Enter the Desired Value ----^
2
D (Fixed): Server/Cashier system is code entry 4 4
System Preset: 911
Bit Description Data MRS
A Fractional Qty System: Ignored/Round-Up/Round-Off 2/1/0
Enter the Desired Value ----^
0
B UPC (EAN) Check Digit System Checking is Enabled Yes/No 4/0
Enter the Desired Value ----^
0
C ---- Not used. Fixed at ‘0’ --- 0
D
Receipt/Journal/(Bill)Slip Header
Format:
Format-3/Format-2/Format-1 4/2/0
Enter the Desired Value ----^
0
NOTE:
- 911-A: Must be set for rounding for Scale operations = 0
- 911-B: You cannot modify this setting once UPC codes have been preset in the system
Page 20 of 246