Product specifications

INLINE SYSTEM
Sharp Electronics Corporation
Master – Minimum procedure
The assumption is that the machine, which is designated as the Master, has a Standalone
program defined prior to the following procedure.
Procedure:
Enter the SRV-Mode as outlined in Section -3
① Select [2 SYSTEM PRESET]
② Select [1 TERMINAL SETTING]
③ Set SRV#920 = 7452 followed by [ENTER] key and then [CASH] to return to the SRV
SETTING menu
④ Depress the [CANCEL] key to return to the SRV Main Menu
⑤ Select [3 IRC SETTING]
⑥ Select [1 TERMINAL SETTING]
⑦ Select [2 MASTER]
⑧ Enter the desired IP ADDRESS along with choosing the desired parameters:
• PLU/UPC Centralized/Individual
• PLU/UPC STOCK Centralized/Individual
• GLU Centralized/Individual
• POSITIVE Centralized/Individual
• NEGATIVE Centralized/Individual
• Backup Master: Not/Exist
⑨ Depress the [CASH] key to continue the IRC SETTING preset for the Master List
IMPORTANT:
A PROGRAM RESET should be performed at the completion of the IRC SETTING job
Page 150 of 246