Product specifications

INLINE SYSTEM
Sharp Electronics Corporation
6. KP Printer Device setup
Procedure
Enter the SRV-Mode as outlined earlier
① Select [2 SETTING]
② Select [1 DEVICE CONFIG]
③ Select [08 KP#1] – [16 KP#9]
④ Enter the desired Channel # and Terminal # and choose the desired parameters (Printer
Name: Type and Auto Cutter: Yes/No)
⑤ Depress the [CASH] key when all settings are completed
The menu will return to the Device Assign Sub-Menu
⑥ Depress the [CANCEL] key to return to the SRV Mode Setting Sub-Menu
NOTE: When “ALL” KP printers are assigned to the desired Channel No., it is
recommended that a PROGRAM Reset be performed.
Assignment Method: The CHANNEL NO. assignment is only dedicated at the
machine where the printer is physically connected. For the Inline configuration – the
TERMINAL and CHANNEL of the machine where the printer is physically located is
required.
Please consider the general rules listed below when using this feature:
• A printing device can not be assigned to a Channel where a non-printing device is
already assigned (ex: SCALE)
Page 138 of 246