Product specifications

INLINE SYSTEM
Sharp Electronics Corporation
1. Inline Setting
The INLINE SETTING programming job is available as a standard preset in case there is
the requirement for modification after the initial SRV Mode IRC SETTING job has been
executed.
Procedure:
① Enter the PGM2-Mode by pressing the [MODE] key and selecting [6 PGM2 MODE].
Select [21 INLINE SETTING]
② Enter the desired IP ADDRESS along with choosing the desired parameters:
1. System Retry: Enable/Disable
2. Lookup Order: MA/SA
Assignment Method: It is recommended that the when changing the IP ADDRESS 4
setting that this be performed through the IRC SETTING job.
Please consider the general rules listed below when using this feature:
• When changes are made at the Master, the Master List will be prompted (the existing Machine
No. will appear at the Terminal No. input)
• The INITIAL D/L: INLINE PRESET job should be performed upon completion
2. Server Sign On Report
Procedure:
Enter the PGM2-Mode by pressing the [MODE] key and selecting [6 PGM2 MODE].
① Select [20 INLINE READING]
② Select [2 SIGN ON SERVER]
③ Select [1 DISPLAY] to view the reading on the touch-screen or select [2 REPORT
PRINTER] to generate a hard copy of this report.
Important:
It recommended that the SERVER SIGN ON reading is performed prior to working on an
installed system to insure that when entering the SRV mode that the servers have been
previously signed off
Page 133 of 246