Product specifications

INLINE SYSTEM
Sharp Electronics Corporation
PGM-Mode:
PGM Mode Job Listing
PGM2 –Menu Description Master Satellite
PGM2 05 Data Clear
  limited
PGM2 06 Open Store
 
PGM2 07 Close Store
 
PGM2 08 KP Reading
 
PGM2 09 KP Setting
 
Inline Preset
20 Inline Reading
Sign On Server
PGM2
21 Inline Setting






PGM2 22 Initial D/L
 
PGM2 23 Maintenance D/L
 
PGM2 24 Declaration
 
Inline System – Terminal No. IP Address:
This programming is intended to determine the terminal number of each machine within the Inline system
• TERMINAL NO. IP ADDRESS 1 – 3 must be set the same for every machine within the Inline
system
• If TERMINAL NO. IP ADDRESS 4 is programmed at “0”, the machine’s Inline communications
function is disabled
• If two or more machines are assigned the same terminal number within the same Inline system,
communications cannot be assured
• TERMINAL NO. IP ADDRESS 4 must be 1 and 254
Assignment Method: When the above guidelines are not observed, when
programming the Master’s polling list, a LOCK ERROR will result.
Page 132 of 246