Product specifications

INLINE SYSTEM
Sharp Electronics Corporation
Section-5: IRC Related Programming
IRC setup programming consists of service-mode and PGM-mode programming jobs,
which define the UP-800 Inline system capabilities.
Related Programming Jobs: Inline System
SRV Mode:
SRV-Mode Related Jobs
SRV Menu Job No. Description
Setting – System Preset 902-A Inline operations are Enabled
Setting – System Preset 919-A
Guest Check System / GLU/PBLU Entry is Compulsory
for Reorder Entries
Setting – System Preset 920-A, B, C, D
A-Back-Up Master Function is Enabled
B-Back-Up Master can perform System Reports &
Download Jobs
C-Inline Download Jobs are Broadcasted (vs. sending
individual)
D-PGM2-Mode Programming is allowed at the Satellite
Terminal
Setting – System Preset 921-B
GLU System Control-Each Terminal/Centralized
(Master)
Setting – System Preset 923-A, B, C, D
A, B- The No. of Records which are requested for the T-
Log Polling Function
C-T-Log Function is Enabled
D-T-Log Polling Cycle (seconds)
Setting – System Preset 924
Inline System Control upon Individual Z2 Resetting
Reports /
Lock After Ind. Daily Net Z2 Report / Lock after Ind.
Trans. Z2 Report
Setting – System Preset 925-A, B, C, D
A-Method of System Trans.-Z Resetting / Only Individual
Reset/All data / System Trans.-Z Consolidation Clears
Individual memory
B-Various Individual report jobs are allowed
C-Print format for Consol. Reports
D- Allow resetting reports while Server remains signed-
on / Allow resetting reports while the store is open
NOTE: These are minimal settings for the terminals. More programming may be necessary
as per end user specifications.
Caution:
Making changes to the Systems Presets that are related to Inline System control will require
the execution of the IRC SETTING job.
Please consider the general rules listed below when using this feature:
• An IRC SETTING is required after modification to the above SRV Job’s
• A PROGRAM RESET is required upon modification
Page 131 of 246