Product specifications

INLINE SYSTEM
Sharp Electronics Corporation
Section-4: Basic Inline System Setup
Each Satellite and a Master is assigned a unique terminal IP Address during the IRC
programming. The terminal IP Address acts as the “terminal no.” for each machine on the
network. The Inline setup has been automated through the IRC SETTING job in SRV-
mode, which may be executed as follows:
1. Satellite
Procedure:
Enter the SRV-Mode as outlined earlier
① Select [3 IRC SETTING]
② Select [1 TERMINAL SETTING]
③ Select [1 SATELLITE]
④ Enter the desired IP ADDRESS along with choosing the desired parameters:
• PLU/UPC Centralized/Individual
• PLU/UPC STOCK Centralized/Individual
• GLU Centralized/Individual
• POSITIVE Centralized/Individual
• NEGATIVE Centralized/Individual
• Backup Master: Not/Exist
Assignment Method: The Satellite terminals should be setup prior to the Master. The
IRC SETTING job will automatically CREATE or ERASE memory file allocation based
on the terminal-type selection.
Please consider the general rules listed below when using this feature:
• A PROGRAM RESET is required upon completion
• A journal printer should be connected in order to see that the available memory is
sufficient (memory lacking errors are printed only on the journal printer)
Page 126 of 246