Product specifications

PERIPHERALS
Sharp Electronics Corporation
Section-6: Coin Dispenser
The TeleQuip Transact Coin Dispenser may be added to the UP800 configuration as
outlined below:
1. Coin Dispenser Setup
Procedure
Enter the SRV-Mode as outlined in Section -1
① Select [2 SETTING]
② Select [01 DEVICE CONFIG]
③ Select [22 COIN DISPENSER]
④ Enter the desired Channel #
⑤ Depress the [CASH] key when all settings are completed
The menu will return to the Device Config Sub-Menu
⑥ Depress the [CANCEL] key to return to the SRV Mode Setting Sub-Menu
NOTE: When “ALL” devices are assigned to the desired Channel No., it is recommended
that a PROGRAM Reset be performed.
Assignment Method: The CHANNEL NO. Assignment is required at the machine
where the Coin Dispenser is physically connected. For the Inline configuration –
there is no re-routing function available.
Please consider the general rules listed below when using this feature:
• In order for the Coin Dispenser to issue change, the Cashier/Server drawer assignment
must be set (“1”, or “2”)
• Change due must be enabled in the Media programming.
Page 109 of 246